The whole process of installation and adjustment of diaphragm filter press!

1, the diaphragm filter press should be installed in the gentle concrete basically. The thrust plate support foot at the feeding end is fixed on the foundation according to the anchor bolts. There is no need to apply anchor bolts at the tail end of the support frame, nor do you need to apply 2 nuts to market position and lock the anchor bolts, and a reasonable gap is made between the nut sealing ring and the foot, so that the foot of the equipment can be slightly driven. Before installation, the installation personnel should calibrate the flatness of the beam and the large plan of the thrust plate.

2. The basic structure shall be designed by the construction engineer according to the load of the machine and equipment, and the anchor bolts shall be filled with embedded holes twice.

There should be sufficient indoor space for use and maintenance around the diaphragm filter press. The hydraulic filter press should select the appropriate location to place the hydraulic station to ensure that the hydraulic station can work normally.

4. According to the working standard, place the filter plate of the filter press, and lay out the seepage, cleaning and sewage pipes. It is equipped with a filter device working pressure display screen and a return safety channel to manipulate the filter device working pressure. In the case of the diaphragm compression type, the air compression pipe is arranged.

5. Diaphragm filter press and hydraulic station oil box are equipped with neat 20#-40# hydraulic equipment oil, and the application environment temperature is>-5 C; If the temperature is low, gear oil with similar viscosity and low freezing point can be applied. According to 80-100 mesh stainless steel screen plus gear oil.

6, mechanical equipment or hydraulic machine to reduce the equipment, running the diaphragm filter press energy should be normal work. When the hydraulic press is charged and pressurized, the barometer should rise steadily and the hydraulic transmission system should be free of leakage. The pressure of the hydraulic station should be adjusted according to the specifications. If you find that the fuel tank is insufficient after testing, you must add car oil.