Discussion on high pressure diaphragm filter press spray status analysis!

In the daily production process of the high-pressure diaphragm filter press, sometimes raw materials are ejected, which is also a common problem in the work of the high-pressure diaphragm filter press. However, it will endanger the circulation system of the software of the high-pressure diaphragm filter press system, so that the work cannot be carried out normally, so attention must be paid to it. When the raw material of the high-pressure diaphragm filter press is more serious, it will immediately destroy the filter cloth and filter plate of the diaphragm filter press, increasing the company's application cost. What is the cause of the diaphragm filter press spray?

1. When the filter cloth of the high-pressure diaphragm filter press is assembled, folds occur, resulting in gaps between the filter plate and the spray. This is also a common problem.

2. The high-pressure diaphragm filter press has a high feed working pressure, which may cause spray. Many consumers do not assemble the barometer on the feeding pipeline, resulting in uncontrollable feeding pressure and eventually spraying.

3. Insufficient force distance on filter plate of high pressure diaphragm filter press. When the feed working pressure is expanded, the interaction force in the middle of the filter plate will spread the filter plate and cause spray.

4. There are dirt such as sludge on the protruding surface of the filter plate of the high-pressure diaphragm filter press. After the filter plate is reduced, there will always be a relatively large gap. After removing the sludge, the protruding surface should be cleaned.

5. There are grooves on the protruding surface of the filter plate of the high pulse damper diaphragm filter press or the filter plate itself is destroyed.

According to the above five reasons, it is very easy to find out whether there is a problem with the high-pressure diaphragm filter press, or the relationship between customers and the principle of the high-pressure diaphragm filter press, and some unreasonable actual operation of the high-pressure diaphragm filter press, especially the first factor of spraying is

Diaphragm filter press. For such things, it is proposed that the customer modify the vacuum pressure gauge on the feed line to manipulate the feed working pressure. I think the high-pressure diaphragm filter press is beneficial to reduce the spray problem.